- SICK
- Opto-electronic Protective Devices
- Encoders
- Detection and Ranging Solutions
- Distance sensors
- Level sensors
- Localization and Positioning Solutions
- Photoelectric sensors
- Proximity sensors
- Registration Sensors
- Magnetic Cylinder Sensors
- Safety Switches
- Accessories
- Automation light grids
- Indentification solutions
- Motor Feedback Systems
- Vision
- View All
- Qlight Signal & Warning Light
- Canon Cable ID printer
- I-bon
- I - Wire
- Schneider
- Velledq
- Meanwell Power Supply
- Others
- PHILIPS
- Others
Sensorik Automation Sdn Bhd
22, Jalan Shahbandar 2, Taman Ungku Tun Aminah, 81300 Iskandar Puteri, Johor, Malaysia.
+607-5546088
+6016-7725628
+6016-7725628
D2011M
| Previous | 2 / 6 | Next |
Multiplexer Units D2011M can be installed in the field, close to input sensors, for data aquisition from Hazardous Area. They are connected to D2010M Units to expand the acquiring capabilities.
The Units are primarily intended for Hazardous Area acquisition of low level
signals from Thermocouples, RTDs, mV or mA sources.
D2011M scans all enabled channels using state of the art solid state isolated
relays, and stores all data in a memory buffer, where they can be rapidly
accessed by the Modbus Gateway Unit D2050M.
Expander Units D2011M are connected to D2010M via 20 pole flat cable (up to 30 cm long).
All parameters are software configurable by serial commands
via D2050M Gateway Unit.
The Units are primarily intended for Hazardous Area acquisition of low level
signals from Thermocouples, RTDs, mV or mA sources.
D2011M scans all enabled channels using state of the art solid state isolated
relays, and stores all data in a memory buffer, where they can be rapidly
accessed by the Modbus Gateway Unit D2050M.
Expander Units D2011M are connected to D2010M via 20 pole flat cable (up to 30 cm long).
All parameters are software configurable by serial commands
via D2050M Gateway Unit.