- SICK
- Opto-electronic Protective Devices
- Encoders
- Detection and Ranging Solutions
- Distance sensors
- Level sensors
- Localization and Positioning Solutions
- Photoelectric sensors
- Proximity sensors
- Registration Sensors
- Magnetic Cylinder Sensors
- Safety Switches
- Accessories
- Automation light grids
- Indentification solutions
- Motor Feedback Systems
- Vision
- View All
- Qlight Signal & Warning Light
- Canon Cable ID printer
- I-bon
- I - Wire
- Schneider
- Velledq
- Meanwell Power Supply
- Others
- PHILIPS
- Others
Sensorik Automation Sdn Bhd
22, Jalan Shahbandar 2, Taman Ungku Tun Aminah, 81300 Iskandar Puteri, Johor, Malaysia.
+6016-7725628
FS-N12N
Previous | 2 / 3 | Next |
SPECIFICATIONS
Model |
FS-N12N |
|||
Type |
Standard 1 output |
|||
Output |
NPN |
|||
Main unit/Expansion unit |
Expansion unit |
|||
Control output |
1 |
|||
Monitor output (1-5 V) |
- |
|||
External input |
||||
Response time |
50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) |
|||
Multiple connections to Expansion units |
Up to 16 units can be connected total (two output type is treated as two units) |
|||
Light source |
Red, 4-element LED |
|||
APC |
ON/OFF switchable (Factory setting: OFF) |
|||
Number of interference prevention units |
0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA |
|||
Rating |
Power voltage |
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
||
Current Consumption |
Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)*1 |
|||
Environmental resistance |
Ambient light |
Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less |
||
Ambient temperature |
-20 to +55 °C (No freezing)*2 |
|||
Relative humidity |
35 to 85 % RH (No condensation) |
|||
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions |
|||
Shock resistance |
500 m/s2, 3 times in each of the X, Y, and Z directions |
|||
Case material |
Both main unit and expansion unit housing material: Polycarbonate |
|||
Weight |
Approx. 45 g |
|||
*1 Increases 100 mW (4.0 mA) for High Speed mode |