+607-5546088, +6016-7725628 marketing@sensorik-auto.com


Sensorik Automation Sdn Bhd
22, Jalan Shahbandar 2, Taman Ungku Tun Aminah, 81300 Iskandar Puteri, Johor, Malaysia.
+607-5546088
+6016-7725628

KTM-WN117A1P Contrast Sensors SICK | Sensorik Automation SB

Previous 4 / 33 Next

KTM-WN117A1P Contrast Sensors SICK | Sensorik Automation SB Contrast Sensors Registration Sensors SICK
Quantity
Add Quotation


KTM-WN117A1P | Part no.: 1061787
Contrast sensors |
 
KTM Prime
  • Communication interface: IO-Link
  • Adjustment: Cable, IO-Link, Teach-in button
  • Teach-in mode: 2-point teach-in static/dynamic + proximity to mark
  • Light source: LED, RGB
  • Sensing distance: 12.5 mm
  • Switching output: NPN
  • Light spot size: 1.5 mm x 6.5 mm
  • Connection type Detail: Male connector M8, 4-pin

  • Features
    Dimensions (W x H x D) 12 mm x 31.5 mm x 21 mm
    Sensing distance 12.5 mm
    Sensing distance tolerance ± 3 mm
    Housing design (light emission) Rectangular
    Light source LED, RGB 1)
    Wave length 470 nm, 525 nm, 625 nm
    Light emission Long side of housing
    Light spot size 1.5 mm x 6.5 mm
    Light spot direction Vertical 2)
    Receiving filters None
    Adjustment

    Cable, IO-Link

    Teach-in button

    Teach-in mode 2-point teach-in static/dynamic + proximity to mark
    • 1) Average service life: 100,000 h at TU = +25 °C.
    • 2) In relation to long side of housing.
  • Mechanics/electronics
    Supply voltage 12 V DC ... 24 V DC 1)
    Ripple ≤ 5 Vpp 2)
    Current consumption < 50 mA 3)
    Switching frequency 15 kHz 4)
    Response time 32 µs 5)
    Jitter 15 µs
    Switching output NPN
    Switching output (voltage) NPN: HIGH = approx. VS / LOW ≤ 2 V
    Switching mode Light/dark switching
    Output current Imax. 50 mA 6)
    Retention time (ET) 28 ms, non-volatile memory
    Time delay Switch-off delay, 520 ms (via IO-Link)
    Connection type Male connector M8, 4-pin
    Protection class III
    Circuit protection

    UV connections, reverse polarity protected

    Output Q short-circuit protected

    Interference pulse suppression

    Enclosure rating IP67
    Weight 20 g
    Housing material Plastic, ABS
    Optics material Plastic, PMMA
    Indication

    LED indicator green: power on

    LED indicator, yellow: Status switching output Q

    • 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
    • 2) May not exceed or fall below Uv tolerances.
    • 3) Without load.
    • 4) With light/dark ratio 1:1.
    • 5) Signal transit time with resistive load.
    • 6) Total current of all Outputs.

Technical drawings

 
KTM-WN117A1P
Dimensional drawing KTM Prime
KTM-WN117A1P
Adjustments KTM Prime
KTM-WN117A1P
Connection type See table: Connection/Pin assignment
 
KTM-WN117A1P
Setting the switching threshold (dynamic)
KTM-WN117A1P
Setting the switching threshold (static)
KTM-WN117A1P
Sensing distance

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Subscribe Newsletter